This my 3rd design of this it work great. It connects simply onto the x motor not affecting any of your prints. Unfortunately they way it clamps onto the x motor means that you will loss 8mm of your total hight meaning you can only print to a maximum hight of 312mm. The cable slides into the little support that I made so it will no long get stuck with the bed cable. Any problems let me know and I will fix them or improvements you may have.
- This will remove 8mm from your maximum z height
- This design can be used for A5 and A3S
the first 2 or so layers print at half speed but should be all good.