MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.
It occurred to me that beekeepers might not want those elliptical cutouts in the bottom so I closed them up and uploaded them here.
Added knockouts for spare GPIO's, camera,etc...
Added text to identify the RJ14's and polarity.
Added Version 0.3
Rounded the knockouts & smoothed out the edges some more
Cut out the top of the original a little more for better clearance.
Added some feet for the load cells. Print out of PETG. Run the bolt up through the bottom and put a washer and then a nut on the top before you screw it into the load cell.
I added a schematic for an oxalic acid vaporizer timer that I use. Here's some links to the parts I used.
Just print HiveInterfaceVer02.stl or HiveInterfaceVer03.stl, depending on which board you have. The other files are just to show how it went together. Print it with a brim so it doesn't lift up around the screw holes, because it's pretty thin there
More from Computer
Save to Dropbox
If you’re logged into Dropbox, you can save directly to Dropbox.
Show Some Love
Say thanks by giving ljbrumfield a tip and help them continue to share amazing Things with
the Thingiverse community.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.