MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.
Just a couple spacers to adjust for electrical boxes that were set too far back. Standard single and double gang. These are set at 10 MM but by adjusting the Z height you can adjust for any needed tolerance. I needed mostly about 8MM.
I printed these at .15mm layer height and about 20% infill, 1.2mm wall thickness. You can probably get away with less infill if your printer bridges well.
More from Household
Save to Dropbox
If you’re logged into Dropbox, you can save directly to Dropbox.
Show Some Love
Say thanks by giving jet_aj a tip and help them continue to share amazing Things with
the Thingiverse community.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.