NOTE UPDATED December 2018: This file/scan does NOT match the "new" controllers from the Samsung Odyssey+ HMD. The new controllers are larger, and therefore this model is only for the older Samsung controllers form the original Odyssey.
This is a wall mount for the Windows Mixed Reality Controllers. The controllers are very slightly angled, so there is a right and left version included in the files. The holes in the design are just to decrease 3D printing time, and this object printed just fine, strength-wise, at 10% infill.
Also a bonus! A nice scan from my Artec Spider scanner of the WMR controller (right hand). It is not a perfect scan for the top ring, but that was not the part I was focused on. So, if you load the Fusion 360 file, the scan will be in there, and you can download the 3D scan independently for your own projects if desired.
NOTE: The WMR controllers might be different-sized from different manufacturers....this one is from the Samsung HMD Odyssey controller set.
If you don't have a heated bed, the little wings at the back (where the screws go) could start to pop off the bed...might be good to add a touching brim if that happens to you.
Designed in Fusion 360