This is a Super Mario inspired power star Christmas tree topper that I made since the holidays are just around the corner. Thought designing a custom ornament was a bit cooler than going out and buying one so that's what inspired this creation :)
I designed this using Autodesk Fusion 360 and made two distinct versions of the model, one with rounder points if you prefer that, so do be aware that you do not need all the models I have included here. I was trying to be as thorough as possible for the different things people might need out of a model. I've split the star down the middle so you'd need less support material by printing each piece on it's side. I also included a hollowed out version if you'd like to make it lighter and perhaps put some lights on the inside once it's done. And lastly, if your printer can't properly bridge a 3-4 cm gap (which let's face it, many can't) I also included some files with MeshMixer supports added so you don't have to enable support on your printer. They worked really well for me when I was printing the hollowed out version. Just remember, you only need to download the 2 files for the model you choose to print.
Please let me know if you guys have any questions or if there is something that requires fixing and, most of all, enjoy your holidays!
You don't need a raft if you're printing one of the models with no supports. I only added a raft when printing with the MeshMixer support because I found it would sometimes fall over if I did not.