Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

Gloomeskk

Corruptor from Horizon Zero Dawn

by Gloomeskk Dec 8, 2017
Download All Files

Thing Apps Enabled

Please Login to Comment

how about on the parts that need to be printed twice, put a note on those parts that says print twice Thanks

How would I do that? As far as I know, it's not possible to add a note on a file.

I had to use google translate since my french is limited but here is an example of how I started labeling the parts. (AILE_DROITE(RIGHT WING) so if two were needed (x2) Thanks just a friendly suggestion:)

Gloomeskk, all parts it´s fine to print without a supports, but the CORPS_ARRIERE.SLT the part is impossible to print without. Can you show to us a picture with the position of this part on the bed?

Hey bro, when I import the models into S3D, are they models suposed to be printed with supports are those angles intentionally?
As opposed to being layed flat on the bed?

Hey, all the parts have to be printed on their flattest surface. I did it without supports but you can use some if you want. The weird angle is only due to the position of the complete model in the modeling software.

Ah ok, is it possible to update the .stl’s with the parts flat on the surface as it’s pretty hard to get the parts spot on plumb with the table if i do it in S3D. Can get it close but yeh.

I was just wondering if you designed all of your AMAZING Horizon models in proportion to each other?

The Deathbringer, the Corruptor and the Sawtooth are more or less in proportion. The others were made in consideration of my print bed size so they are not as big as they should be to fit the Deathbringer's scale. They are still big though ^^