Zone Mortalis tile sections with ruins and rubble suitable for any 28mm scale tabletop miniatures gaming. In this set all floor sections are attached to walls to allow the rubble piles to be printed. Print without supports. Tiles are referenced A - I in order of the pictures. More greeble files to come.
Main ZM terrain files - https://www.thingiverse.com/thing:2609090
Doors and Bulkheads (https://www.thingiverse.com/thing:2609112)
Extra Greebles (https://www.thingiverse.com/thing:2609098)
10/12/17 Added H-rail parts for extra support on the ruiend floor tiles (Tiles A, D and E). These are an optional extra to be glued on the underside of the tile if your mounting the tiles on MDF boards or similar with cutouts to give some depth to the gaping holes. See close up photos for clarification.
13/12/2017 Added Tiles 'F' and 'H' - These are inteded to be mounted on a flat MDF sheet with the depression in the floor to be filled with Epoxy resin for toxic waste. An outflow pipe greeble can be printed and glued in place on the wall sections.
15/12/2017 Added Tile I - As per tiles F and H, designed for epoxy resin to pour in the toxic waste. Also uses 2 outflow pipe greebles that need to be glued in place. Also added bulkhead face greebles and support beam to build makeshift bridge for tile E.
19/01/2018 Added ruined wall sections (wall only) from tile A for those wanting to print the wall sections seperately.
Print in PLA without supports, part cooling fan a must though.