*Update 07 Dec 2018: Added V1.2 with chamfer edges and thinner profile (prints faster).
Basic jig to align y axis rods to the body of the printer.
Loosen the rod holders at each corner
insert the jig under the rods
Add M3 washers to the screws
Tighten the screws while pushing the rod and jig towards the body of the printer
Slide out the jig and repeat for other corners. (Or print 4 and use at each corner)
- (Optional) Drill out the holes on the printer frame using 4mm drill bit to allow the rods to be positioned freely, repeat 1-4.