This is a model based on Junkrat's Concussion Mine from the massively popular Overwatch game. It has been designed to sit around a filament spool, but can otherwise can be propped up using other custom 3d printed components.
The internal and underside have been intentionally left empty if anyone would like to customize electronics and whatnot for it (just probably no real explosives please!)
Pieces have been sliced down to fit most 3d printers but if they are still to large, you can use tools like Meshmixer to further seperate the parts.
Assembly on where the parts go are in the instructions attached to this model.
Most pieces will not require support material, and works well printed at 0.2 or lesser layer height, 15-20% infill and with 3-5 shells.
Not included in this model are the tubingof ~6mm diameter for the red and black wires. And probably some black duct tape to attach the black box to the mine body.
Also not included is the handheld remote, that we have designed around a very specific toggle switch. But a good substitute can be found done by Mr. Volt here - https://grabcad.com/library/junkrat-mini-concussion-mine-and-remote-1
Have fun with this and love to see more of these in the wild!
All rights for the original design belong to and are derived from the awesome Overwatch game by Blizzard.
This model is not to be uploaded or sold in any form and is intended for personal use only.
Check out more of what we are up to over at our Facebook Page (http://www.facebook.com/FunbieStudios) or website (http://www.FunbieStudios.com)
Support us on Patreon - https://www.patreon.com/FunbieStudios