An iPhone X case to be printed with flexible filament. I designed it according to Apple's official design guidelines so it should be 100% correct. I've included 2 cases: one with a thick (2mm) back and one with a thinner (1.2mm) back. The thick one protects the camera well. Some people might find it too thick so I've made the thinner one as well. Because that one doesn't protect the camera very well, I've included a ring that can be printed separately and then glued on. The ring is 0.84mm thick but can be scaled in the z-axis to your liking.
I have also made a case with built-in buttons if you prefer that and I also have cases for the iPhone 5/5S/SE, 6S/7/8 and Xr/Xs/Xs Max, Galaxy S8 and more :)
The blue case was printed by Rapnit (see "Made" section).
If you print this case, please post a photo or review of it in the "Made" section, feedback is always appreciated.