Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

Lalo_Solo

USB SD and MicroSD holder for wide USB sticks

by Lalo_Solo Nov 10, 2017
Download All Files

Thing Apps Enabled

Please Login to Comment

Printed this on CR10 today. Works perfect. All cards fit and the MicroSD is nice and snug.

how long did yours take?

printed this on creality cr-x, perfect
thank you!!

This thing is an excellent desk organizing tool! Thanks for it! My sticks and cards were all lying about. Needed this badly!

Sliced with Cura 3.6 - worked fine without tuning on my Ender 3. Only thing i've "improved": Scaled to 101.38%, everything fits fine - expect the USB Slots and SD Card Slots are a little bit to big - but no problem for me, so I can easily remove everything and put back in without problems.
MicroSD Slots are now very tight, so the cards won't get lost.
Thanks for this cool model!

Comments deleted.

Thank you for this thing! Thumbs up to you!

  • Posted with 3D Geeks Thingiverse Browser App

Thanks so much for this wonderful design! Please don't be discouraged by the negative posts below, the design is flawless, including the MicroSD card slots. I printed on my Lulzbot Mini with eSun PLA, 0.2mm layer height at 15% fill. Still using the Lulzbot Cura edition it came with a year ago, no other slicing. As a nominal setting I always set flow to 90%, this seems to help with fine fit matters like holes, slots, etc. Printing on my newly installed PEI bed, the bottom is mirror-smooth, very elegant improvement to my desktop organization!

Comments deleted.

I have tried printing 2 times and it keeps stopping extracting filament, but keeps moving the extruded after about 100 layers (only about 30%). Maybe there is an error with the g-code? I'm using Cura and Creality 10S.

Thank you really much for the STL! Very Useful!

Comments deleted.

Hi, Lalo. My little SDs (nano?) don't fit either. Too narrow for nano, you might say. I can see it worked for others. Maybe it's my Cura 3.1? I've enlarged the slots with a craft knife and emery nail file. Still impressed by the design. Might make an odds n ends tray for it to sit in. Many thanks.

Hi Lalo, I have printed it without problems. The USB and SD Cards fit perfectly. But the MicroSD Cards don't fit. Nevertheless it is used now on my working place - thank you :)

I would like to see a usb cap tray in the back but otherwise it's a great design.

you should add usb cable holders. then it would be complete.

Very good thank you ! By cons can you make a space (behind) to put the usb keys caps ? Like that everything will be tidy

Hello, unfortunately, the last print layer is not available, totally open, no smooth surface. Is there a revised version. If you look at stl everything is ok, you look at gcode, then the last smooth layer is missing.
Klaus

I think you forgot to set a top solid layer in your slicer.?

I have tried making this part 3 times now and the part keeps moving to the corner of my print bed and messing up. My print bed settings have worked before on other prints, but I have never seen this occur till trying to print this. May I ask what setting were used making this?

I had the same problem on simplify 3D.... I used a raft .... bit more filament and time but turned out perfect

Slic3r first two times then cura. I've actually had a slight realization it's all the models I've gotten from this website that are doing this. Before I was printing my own models. So I do apologize for any disturbance.

I sliced it with Cura 3.1 and it works...