I have an A5 laser engraver and wanted the acrylic plates in some form of digital format so I could modify then. Well, Here they are!!!!
The STL files were made by importing the attached DXF files into Fusion 360 and extruding them. All STL files are 6mm thick.
I have included the STL and DXF files. I have also included a modified version of the X axis laser mounting plate that will allow for the X axis motor to be installed above or below the 4020 rail and allow for all three screws on the laser module to actually be used.
I have not printed these on a 3D Printer but did use these DXF files to laser cut the X axis mounts. So far, so good. (sorry, no pictures)
Let me know if you print these or if you have any questions.
Any tips or donations made for this Thing will be donated directly to www.benboxlaser.us to continue that awesome community. https://www.paypal.me/ThothLoki