MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now


Shore Trooper Helmet V2 (Sean Fields) Split to fit 200x200 build plate

by beerman_uk Nov 8, 2017
Download All Files

Thing Apps Enabled

Please Login to Comment

So I just about finished printing these files. Where would be the best place to get the eye shield / visors?

3mm acrylic in the oven at 150c for 5-10 minutes until soft. Whilst wearing gloves mould it into shape and let it harden.

Assuming I am tinting myself?

I had some clear and some visor tint so that's what I used. I was too impatient to wait for some tinted acrylic from ebay. The visor tint I used was shite though, hard to see out of. I would recommend either proper window tint or buying some pretinted acrylic.

Did you find it a little awkward installing the eye shield? I don’t see it sitting flush. I haven’t done it yet. Were there any issues?

Looking at the comments on size, i couldnt fit in the black series stormtrooper helmet as it was a little too small. Any advice on wether this is sized similarly at all if anyone has both?

Hey I want to make this a wearable helmet but I have a pretty big head size 7 3/4 US fitted hat, will this helmet fit me or do I need to scale it up? and if so how much?

I got it to fit, but I had to shave down some of the inside to fit my nose comfortably. I’m around a 7.5 size fitted hat (aprox)

I use a UK large motorbike helmet and it fits me, sorry I have no idea on US hat sizes :). It's not as roomy as other helmets I have made but it goes on my head.

what size motorcycle helmet do you use? Also whats the difference between the revised visor/etc. and non revised parts do I need both versions?

A UK large which according to Sharks website is 59-60cm or 23.2-23.6inches. I used the revised one but the other is pretty similar just a tiny bit smaller. No you don't need both.

Any good guides how to put together ?

Check the images on the post, they are in order of the assembly.

This would fit a wanhao duplicator I3 Plus right?

Yes, it's the same build plate size as the printer I printed it on (Tevo Tarantula)