My design take on an acoustic guitar wall mount. I wanted something a little more stylish to display my many guitars on the wall so this is what I created.
EDIT was unsure on the thickness of certain areas of the design so i made it a bit thicker in places
Now printed and worked perfectly! Printed with ICE PLA gold filament at 0.15 layer height.
I would suggest a higher infill for the strength and higher resolution for the overhangs... shouldn't need supports on a half decent printer!
My print was split with 20% infill at 0.2mm for the base and 30% infill at 1.5mm for the arms/supporting arms. Took around 6 hours to print at these settings on my Ulitmaker 2+
My Faith Naked Venus & Taylor baby 3/4 with my Flash symbol