I had previously printed out "CR-10 50 x 15 Double Blower Fan Fang Mount
by dhien2" (https://www.thingiverse.com/thing:2481055) for the stock hot end on my CR-10, but recently purchased an e3d clone. I wanted to keep the ability to easily switch from one to the other if I had the need, but didn't see any options that I really liked so I decided to create an e3d v6 mount that would fit the dual fan fang mount that I had already printed :)
After finding a few e3d mounts here on thingiverse that had source files available, opened them up and got the measurements I needed. I then proceeded to build a mount with the appropriate measurements that would fit and work with the fan mount I already had. And this is the result :D
I have included .stl's for both the front and back separately, as well as one where they are both in one file. I have also included my fusion 360 .f3d file if anyone wants to do any tweaking to the file in case one of the measurements I used wasn't exactly right.
I hope somebody finds it useful.
I would believe supports are needed on the back section for the recessed area and post holes from the bed, and the two slots for retaining nuts, but that is ultimately up to you, the user :). The front section should be fine.
This print requires 2x m3x8 screws to attach the mount to the carriage, 2x m3x16 & 2x m3 nuts to attach the front mount to the rear mount