I wasn’t really happy with the spool holders I’ve tried on here, so I created a spool holder to attach to the metal bracket that came with the CR-10. You’ll need to purchase a 6” M8 bolt and nut(5/16 may work as well) as well as two 608 bearings.
You’ll need to print:
- 2 of the 25/70Spoolholder
- 2 washers
- 1 nut
- 1 bracket mount
I printed with the top, bottom and outer layers set to 5 in S3D to ensure strength in the threads.
I used a little epoxy to hold the bolt in the bracket mount.