the complete sd card contents with nothing removed.
the firmware that comes on the board with the kossel is junk so i included a preconfigured version of marlin 1.19 for the flsun kossel with large print bed and on the firmware is the auto calibration option so basicly upload firmware, run auto calib which is in the prepare menu page and then save config.
the kossel ini file is my cura profile, works for me so would be an example for others
as for calibration, i found this...... https://www.youtube.com/watch?v=vEmBDYcx30Y
How I got this thing working....
reset to default settings in "control"
in delta settings i tried running the auto calibration but it failed each time so i adjusted the height to max then ran auto calib again, it failed but now let me change thje height again, i did this several times until auto calibration sucsseeded then saved all in EEPROM then all done :) frigen pain it was too.
I Have now added to custom menu an auto calibrartion on steroids which is comand G33 P10 "Calibrate all" this has way more calibrartion points than the standard version in prepare menu, so maybe use that then save to EEPROM