Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

cilynx

Parametric Kossel Base Panel

by cilynx Oct 9, 2017
Download All Files

Thing Apps Enabled

Please Login to Comment

Hi, could you maybe add a two-part version of the panels? On my Kossel Delta Pulley, I have only about 32cm of clearance to the top so the part is a bit too tall for the print bed. Will print one of the base stands soon as I want to make the cable mess below the heated bed a bit more bearable, add a bit more distance between the electronics and the (kapton taped) heated bed and maybe add a stepper driver fan funnel.

I'm not familiar with any delta machines where the printable height is shorter than the horizontal extrusions. Have you measured your horizontal extrusions to be sure you're working with the proper length? 34.5cm is correct for my machine, but probably not a lot of others. If you do need to print panels in two piece, you could use Customizer or OpenSCAD to make two panels that are half the length you need plus a little overlap to bolt the panels together in the middle.

Hi Will this fit for BIQU Kossel Plus? I tought the extrusions where 350mm?

Yes, the rendered STL fits the BIQU Kossel Plus -- I have them on mine. I just double checked for sanity, the extrusions (at least on my machine) are definitely 345mm.

very nice work!
peaberry added a higher Version of the base stand for more space under the printer
can u plz add some fitting panels for the new versions?

You can make them any size you like using the Customizer. Just set the Panel Height to 75mm or 100mm or any other height you like and save the customized Thing. For your Anycubic Kossel, you may need to adjust the Panel Length as well. I only know the exact dimensions of my own machine. Good luck!

Thanks! I'm working on both a base to hold the most of the electronics as well as a "hat" to cover a trio of extruders on top for a diamond setup all based on your base stand. Thank you for making it!