MK3 version =====> available
Actual progress : 80% ----> progress stopped.
DOMINION CRUSADER MK3 is in the pipes !!
Keep in touch for updates
Today is the day to update my favourite titan
Note : This is still a work in progress, but it should be finished this october
I have scratch rebuilt the entire armour, with new pauldrons.
Bonus : Mageara variant !
Assembly will be much easier, and arms will have adjustable articulations.
for assembly you will need some 6mm and 2mm rod (or some 1.75 filament)
Everything I uploaded should be good to print now !
Parts still pending :
- leg armours
- neck + head(s)
update 06/10/2017 :
added some parts and updated the armour parts. print as oriented !
Ball jointed shoulder is printed and works perfectly
Hint : for the top armour tilt the part a little bit (15°) in order to get some support for the exhaust hole
Ball jointed secondary weapon works fine too
modified the upper body, it needs more clearance to fit the head
new shin guards are being modelled
uploaded legs adapted from Stroganoff's wonderful set
- parts are filled (original were hollow)
- upper leg was upscaled by 3% to have correct clearance with hip and knee
- waist has a 6mm hole on top to assemble more easily with body (with a 6mm rod)
Next parts to come : shin guards for classic and magaera versions
leg armours, front armour(optional) and new neck uploaded (head(s) will come soon)
magaera groin armour needs to be heated and bent once printed.
update 11/02/2018 : added 2 heads : anubis (thousand sons) and wolf (spacewolves)
update 16/02/2018 : magaera shin guard added
Please leave a comment or PM if you have suggestions
== Please consider sending tips if you like my printable models ==
Copyright infringement is not intended. Parts are created freehand in 3d modeling software, no copyrighted product had been scanned or copied in any way. These models are for personal use as proxies and should never be sold. If it causes copyright issues, i will remove it.
Internal view of the assembled body. You can see the 6mm rods for the ball jointed shoulders assembly
Waist is OK. legs are ok too (needs some cleaning). First test of the magaera groin armour
New parts : neck and front armour