3D printable shocks for RC cars. Specifically 1/10 cars with ~81 mm front and ~91 mm rear shock lengths center to center.
These shocks fit the MKUltra buggy perfectly:
The PDF contains assembly instructions and parts list.
Do not tighten the top cap excessively. Only enough to seal and prevent loosening. Overtightening can result in the cap splitting.
I uploaded alternative shock bodies for 3x2mm O-rings: https://hobbyking.com/en_us/2-in-1-o-ring-kit-white-10pcs-bag.html
New shock caps with holes for M2x8 screws to strengthen them and prevent them from cracking around the seal slot.
Print all parts at 0.08 mm layer height and 100% infill. No extra support needed.