MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.
Designed for Kossel frame with 240mm horizontal 20x20 aluminium extrusions and 200mm dia. print bed with kapton heater. You will need a piece of ceramic fibre blanket to go underneath the print bed. Ramps mounting bracket included.
There is no hole to run heat bed cables, you will have to use a drill..
I've been planning to use openbuilds standoffs but they might heat up too much so the best option would be to use teflon ones.. something like http://www.ebay.co.uk/itm/PTFE-Teflon-White-Tube-Pipe-2-to-3mm-wall-10-to-18mm-OD-6-to-12mm-ID/222625547740
Ideally, it should be 10mm dia. tube with 3-4mm hole, cut to 9-10mm ...
3 x bed support pieces (ABS - 50% honeycomb infill)
3 x openbulids 9mm standoffs - this should be replaced with teflon ones..
3 x M3 15mm DIN 912 bolts with nuts
6 x M5 8mm button head bolts
3 x M3 6mm DIN 912 bolts with nuts - for RAMPS bracket
More from 3D Printer Parts
Save to Dropbox
If you’re logged into Dropbox, you can save directly to Dropbox.
Show Some Love
Say thanks by giving Crashoverride a tip and help them continue to share amazing Things with
the Thingiverse community.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.