Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!
KRushin

CR10 Titan Aero , EzABL and Part Cooling fan

by KRushin Sep 28, 2017
Download All Files

Thing Apps Enabled

Please Login to Comment

Can someone tell me what the EZABL probe offsets (x,Y) are for this mount? Thanks in advance.

What is the offset for the EZABL?

started using this but it drags along my bed and messes up the prints. how are you preventing this?

Can you make a second version with the 18 mm ABL mount shifted left 5mm? The genuine E3D pancake stepper motors with .9 deg steps are thicker than the 1.8 degree generic motors. Mine just overhangs the ABL mount about 5mm Otherwise this would be perfect. I believe the non E3D motors are 20mm thick and the .9 degree step E3D motors are 25mm thick. This mount would be perfect otherwise. I am used to manual leveling, but would love to try my ABL sensor setup. It would be nice to have this with another mounting height for the E3D Tornado Hotend as well. I can find parts of all these,but there is no E3D Titan Aero, Tornado mount with ABL mount on thingiverse sadly. Yours is about the closest. I figured I could just bend your fan mount duct down, but the 18mm sensor hole blocked almost 5mm makes it a no go. Or maybe just share the step file so I can modify it moving the ABL mount 5mm.

Would you mind uploading the .step?

Trying to print, how are you geting the lower end of the fan vent to print? Using Cura to slice, it's just printing a bunch in disconnected air trying to make the vent. I think you need to add support, but otherwise nice model - thanks!

I had a hard time printing that part in cura as well. I just kept adjusting and checking settings and got it OK but not great. It did do a ton better in S3D after I bought it and used another users custom profile fwiw.

This looks like a really nice mounting bracket - I'm curious though, are you happy with the performance of the Titan Aero, and is that tiny pancake stepper motor enough to extrude fast prints? Thanks for the upload.

Thanks for this!
What were the offsets you ended up using for the EZABL firmware?