MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.
A twisting tower standing on a very unnatural hill.
You can print the tower and the base separately, or whole thing at once. Either way no supports are necessary. I would recommend printing the tower slower and with lower layer height. Also for the stairs it's recommended to use higher infill to support the steps, and/or many top layers. My print with 15% infill and 4 top layers had some small gaps.
More from Buildings & Structures
Save to Dropbox
If you’re logged into Dropbox, you can save directly to Dropbox.
Show Some Love
Say thanks by giving kijai a tip and help them continue to share amazing Things with
the Thingiverse community.
Remember to come back and post what you've printed as Make.
It's good for the designer and the community (that means you)!
To post a Make, come back to this Thing and click Post a Make.
Or, you can use the Thingiverse Mobile app found on
and the Apple App Store.