This kit contains three parts used to upgrade the standard extruder on the AnyCubic i3 Mega (also called Omega i3) to the official E3D V6 hotend.
The parts included are:
- Bowden Support -> Supports the tube connection to the hotend
- Left Cover -> Used to attached the original part cooling fan
- Adapter ring -> Connects to the top of the hotend and ensures the height of the upgrade places the nozzle at the same height as the original hotend
Print all parts at 0.2mm and without supports or rafts.
The following video is a guided tutorial of the full installation process:
My Simplify3D profile created for the AnyCubic i3 Mega that has been upgraded with both the Titan extruder and the E3D V6 hotend can be be downloaded from:
You will need the following parts from E3D online to complete the full upgrade:
And if you want to use my profile you will also need the following:
The Amiga Raspberry Pi Case pictured above was printed on the upgraded AnyCubic i3 Mega and shows what incredible quality the printer is capable of producing.
Added Adapter Ring Cut Rotated and Bowden Clip. These two parts replace the original E3DV6 Adapter ring and prevent any slippage of the Bowden tube.