Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!
danricho

100mm Whoop Frame (Fusion 360 parameter driven)

by danricho Sep 22, 2017
Download All Files

Thing Apps Enabled

Please Login to Comment

bonjour.
j'utilise une caméra qui ressemble beaucoup a la eachine MC02, mais elle ne rentre pas en longueur dans le support.
est-il possible de le modifier pour une longueur de 23.4 mm au lieu de 20 mm ?
en vous remerciant par avance.

I don't see why not.. although I would measure any cables which route between the layers and are outside of the 20x20 footprint and subtract any material required to route them.

Any chance to get this frame modified to fit 3" propellers please or 2.5" (just missing a mm or so to clear those)?
Tried your fusion 360 file, but lack the stills to make it happen :(

can you please upload a video?
I think the frame and the setup is very interesting.

Can this be used with 1103 motors on 2s? Or is it to heavy?

I haven’t tried it, but it should fly.

Any idea on bare frame weight?

Weighing in at 30g in PLA.

I am at 24 grams 35% infill abs

Cool. What infill is that?
Thanks!

Technically it's 20% in Slic3r, but my infill threshold settings kept the print solid where any infill was required. Posted a make. Thanks for the design.

Sorry, no I haven’t weighed it empty. If I do a reprint, I’ll make sure I do.

I also didn’t print at 100% infill so it is quite light.

Thanks! What infill did u print? I am currently printing the doinker in abs.

I believe mine was 20% infill on simplify3d and printed in PLA (which isn’t as optimal obviously for crash resistance - but doesn’t warp).