MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now


Rude Cheesehead Gnome Poker Card Capper - Green Bay Packers

by UWcharlie1983 Sep 8, 2017
Download All Files

Thing Apps Enabled

Please Login to Comment

That is an awesome green color, what brand of filament is that?

The base card capper appears to be mis-sized? It's opening as a little dot. Isn't it suppose to be the same size as the holder card capper?

Hi James,

The Base_Card_Capper has a large enough opening to allow the Holder_Card_Capper to slide inside of it. The opening in the base is on the bottom side of the model so isn't shown in the picture of it (unless you use the "Thingiview" to rotate it to where it can be seen).


Sorry Charlie, but I do understand what you are telling me. The issue is that when I open the .stl for the BCC it is teeny compared to the HCC or the Cheesehead. What are the dimensions of the BCC? I can scale it up, but I don't know how far.

Strange, I'll try to look into this. I wonder if your slicer is converting it from inches to millimeters even though it was designed in millimeters. If that is the case you'll need to scale it to 2540%.

The Base_Card_Capper is 39mm in diameter and 12.9mm tall. Hope that helps; sorry I misunderstood your initial question. Let me know if you need any other help. I'd love to see a picture of what you print if you get it sized properly!

Yup, this time when opening in S3D, it said it was small and possibly converted. It asked if wanted converted back, and BOOM, all is well. Now I gave one to a fellow Packer Backer friend yesterday and he asked if it could be made bigger. Went into S3D and Scaled to Max. Working on increasing size of Base wit it's new numbers. The Holder is now 61.41 diameter and 17.12 tall. Trying to figure how much bigger to make the Base. Any ideas what the new numbers for the Base would be?

It looks like you're scaling to 194.5%. That would make the Base_Card_Capper 75.87mm in diameter and 25.10mm tall. The fit between the Base and Holder might be a little looser because the clearance is also being scaled up. Also, remember that the nickels used for ballest won't fit tightly anymore. You may either want to go without them or scale it to fit a quarter, half dollar or washer. The Base and Holder should be scaled together, but they don't need to be scaled to the exact same value as the Gnome and Cheesehead since the Gnome is just glued to the Base.

Can you post a make when you get it printed and assembled? I want to see how it looks scaled up!

I printed out a few for fellow Packer Backers. Was a big hit. Speaking of big, was asked if I could make bigger. Maxed it for the printer I was using. Turned out pretty well. The coat hem had some stringing. All in all, a fun printing project. Good job. Go Pack! We’ll be back. Thx

Glad the design is being printed and enjoyed. Your prints look awesome; especially the big one! Thanks for the picture.

I'm starting print for max on my printer. I think it will be about 4-5 in tall. Created solid base from your Base file. Will post pics for sure.