Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

3DPModder

Tevo Tarantula Extended Case (minor remix)

by 3DPModder Aug 23, 2017
Download All Files

Thing Apps Enabled

Please Login to Comment

can you direct me where you got the bus/power distribution bar for this.

can you please give the link to logangraphicslcd case i can't find it

It's listed on details page as source for this remix, but here is the link anyway https://www.thingiverse.com/thing:1760296

Tevo Tarantula Extended Case

Thanks man... Appreciate it!

hi everyone, anyone printed this control box? i dont see the top lid and bottom lid

I mentioned that in the summary: No changes made to Top or Bottom, see logangraphicd's original design for these STLs.

Just take a look at the project it shows that I remixed it from and grab top and bottom there. :)

First attempt for a long-hour print.

What is the size of the glass bed? Nice 3d printer setup! Looks really clean!

220x220 to cover the whole bed.

Printer doesn't look quite like that anymore, moved it into an enclosure and I'll be doing dual Z upgrade next week too

Thanks! Btw, nice Ikea lack enclosure!

Hello,

I'm curently printing this case but i have a doubt : with the stock power supply, should i use the xl version of the top and bottom or the regular one?

Thanks

To have the stock power supply in the case, use XL.

Thank you for your quick response :)

Can I still use the original 1286 display panel walland the XL parts from the original in a mix and match case with your reimix?

Can't see any reason it wouldn't, I didn't change any dimensions, just filled in holes mostly

Hey, i just got a tevo tarantula and i am working on cable management. Can you link the STL and explain how you made the chain from the hottend?

Here's the cable chain, and it includes X carriage connectors for various carriage types. https://www.thingiverse.com/thing:2396718

XYZ Full drag cable chain for tevo tarantula

Just what I was looking for

whats link to cooling fan with level attachment

Right here. Multiple STLs for various need sensors, be sure to grab the right one for your sensor.

https://www.thingiverse.com/thing:2175956

Radial Fan Fang
by Lion4H

Could you make a front LCD panel that will fit the current Tarantulas LCD? The one that comes with the printer and looks like the attached photo will not fit with this design?

That's the same LCD I have, it fits.

Hey,
have you changed the Power Supply Fan?

I think it is very noisy. I think about installing a tube from the Power Supply to the rear fan an making some cuts into the tube .. so that the rear fan would blow out the air from the power supply and the case.

The picture is not a master art :) But i helps what i mean.

So you wont need the power supply fan any more.

You printer is a work of art!
My sincere congratulations

Very nice case, thank you for sharing.
I just printed left wall with SD card slot and screw mounts are on the left side of it. Can it be that it is mirrored? It looks this way also on the model/picture?

The stl is correct. Do you have it oriented the right way when you're looking at it? With the slot in the upper left corner the two screw standoffs should be one above the other, just right of center and the bolt mounts will be on the top-left, top and right edges. There will be no mounts in bottom-left or bottom edges. In this orientation you are looking at the inside of the case.

https://drive.google.com/file/d/1L2kdgt_nPFy5QjcxPO9If68Bc3ru_H2j/view?usp=drivesdk

You are right, I oriented it wrong - sorry for the false alarm. The picture explains it well. Before I was also wondering "why is it so long" but somehow I did not think about reorienting the peaces.

Kinda what I figured, mostly cuz I did the same thing when I first printed it :)

Hi,
A what kind of panel is fixed onto the wall?
You would be able to show a picture, how it is necessary to tie up the cables?

I didn't use a specific STl for that, just used a bit of scrap from a failed wall print, but logansgraphicd's original project does have a component panel that can be printed, look fro the Left component panel under the project https://www.thingiverse.com/thing:1760296

Tevo Tarantula Extended Case

nice remix.
is it possible you will share your filment holder ?

The filament folder comes from 3 places:

The corner support with the upright 'goalposts' (in black) is my design, available at https://www.thingiverse.com/thing:2463168

The orange central spindle that goes through the role of filament is Dintid's design and the orange knob on the end of the metal rod is borrowed from another project.

If you follow the link to my design, it has all 3 project STLs included.

Tevo Tarantula corner bracket and top mounted spool holder combo

tnx i will print it :)

I have started printing this :)
Will post pictures when its done. Awsome case..

There is a 80mm fan in the front. is it the same in the back, or is it 120mm?

Both front and back use 80mm fans

Comments deleted.

Best looking tarantula i`ve seen so far.

very nice remix, will be on my list of things to print, thanks!