I remixed the X-Axis Mount as the original one would collide with the rambo case and would not allow the endstop to be reached.This works for me.
Download this if you also have problems hitting the endstop...
All credit goes to SoundDoc for this cool cable chain :-)
- Redesigned the Rambo Door and the part to be able to use all surface area of the print bed! Now you should be aqble to print parts with the max size of the bed :-)
Do not print with supports. Print with PETG or other strong stuff.
Remove Elefant Foot and Plastic and make a test fit!
Make sure to remove all the excess plastic and fit it in the part before you actually mount it. Also test with a screw if the parts fit. If not remove overhangs etc. Make sure the small inner pieces