Here is another nice model for your 28mm armies !
The original model is from Nexu.
I have reworked it to be easily printable and add many details (cockpit and many small features on the hull) and working doors at the front and rear.
The side doors are compatible with ank doors such as https://www.thingiverse.com/thing:1431768/#files
Check our Patreon for more awesome designs
edit 17/09/2017 :
The pack for the front parts is here :
edit 20/09 : FINALLY FINISHED REMODELLING THE MAIN PART OF THE SHIP in CREO, now it needs to be cut into smaller parts, but it should be REALLY REALLY nice ! (i'm quite proud of what I've managed to do this time :) and it's only 2Mb !)
edit 03/10/2017 : weapons added. print as oriented
Project finished for now :)
edit 30/12/2017 : added top_cut 1 - 4 for small printers
edit 10/04/2018 : added a cross shaped support to be glued under the hull for mounting a stem
edit 23/04/2018 : remeshed some heavy parts and added symetrical parts with _sym suffix
some parts will have to be printed twice (1 + 1 mirrored)
- top wing 1 & 2
- lower wing
- rear land pad 1 & 2
these ones have to be printed twice :
- middle reactor
Assembly with Ø4mm pins, and a 1x10x5mm sheet between hull1&2
for the back door use some 1.75mm filament as axis
for the front door some 1mm metal wire (paperclip)
Print as oriented, with some supports here and there
Nothing is difficult to print in this project. But some parts are quite big and long to print :/
Check the remix section for conversions (2 types of side turrets)
For interior details, you can use Harnesses and control panels from this design :
== Please consider sending tips if you like my printable models ==
Copyright infringement is not intended. Parts are created freehand in 3d modeling software, no copyrighted product had been scanned or copied in any way. These models are for personal use as proxies and should never be sold. If it causes copyright issues, i will remove it.