This is a box for sleeved X-Wing damage cards, with a sliding lid. It is modeled after the crates seen on Rebels. The lid lends itself to customization and two-color printing. I have included STL files with the Rebel and Imperial logo. These were made by opening an SVG file in Inkscape, saving as DXF, opening this in Microstation and converting the 2D geometry to a solid, which was then exported to STL and imported in OpenSCAD.
Edit 10/23/2017: Box has been slightly modified to keep the lid from falling into it.
Prints fine at 0.3mm layer height with 2 perimeters and 2 top/bottom layers. Print time is then approx. 2 hours on my printer.