I have remixed the design from the original tip of this design: https://www.thingiverse.com/thing:1453126
All credit to original designer for his initial design - it helped me a lot.
PLEASE NOTE: This is designed for an Airsoft Toy replica only! I do not accept any responsibility for the usage of this design outside the specific design perimeters! Use this responsibly and for airsoft only!
I had to fix some splicing issues on the original design, and the barrel was too small (in my opinion), as such i retained the original, for those that prefer small barrel, but added a larger barrel that fits over the original - this can be modified to take any barrel tip then.
The AEP slides into the frame, and is locked in place with the back block - the back block also adds some stability to the design.
All items are glued together (excluding the AEP and the back block - the barrel tip cover can be glued in place if preferred).
Please note that this is designed for a TM G18C AEP - it will not take a GBB or any other pistol that cycles. I have tested it on my AEP and it works, has seen several games, and taken a few shots on the print itself as well.
The Design works well with this (https://www.thingiverse.com/thing:2306837) rear sight and this (https://www.thingiverse.com/thing:1667830 nr 3) front sight - these are what i have on my one currently.
Please like and share, and if you really like it.... you can tip:)
This was printed 25% infill with ABS