- The included STL File in this post is a dummy file of 1/16 3/4x3/4 by 62mm in length L shaped aluminum angle so that a picture can be posted. See below:
Anet A8 X-Axis Belt Aluminum Holder made out of 3/4x3/4 aluminum L shaped angle cut with a Dremel rotary tool. Just used 1/16 3/4x3/4 aluminum angle cut to the width and rest of the slots cutout using Dremel rotary tool with a grinder wheel. To give better idea I added a rough drawing based on the created bracket that was cut without being previously drawn out, basically I just winged a prototype without drawing, just used estimated measurements. As you can see this is pretty much to the size, but it is missing mounting holes at this point, which I believe can be drilled at a fitting. I do not believe that this thing should be made out of any kind plastic. I think I might make a slight modifications to its sizing dimensions to make the belt be more parallel to have a slightly better performance.