MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now


Skull LED Lamp

by Mike-vom-Mars Aug 1, 2017
Download All Files

Thing Apps Enabled

Please Login to Comment

I think biggest issue is print speed I had the same happen to me using cura with the eye sockets but I think it was related 2 print speed.

Hi, I have tried to print this, but the lower part of the eye sockets get realy shitty :-( And after looking over the GCODE in Cura, i noticed that the lower part of the inside of the eye is in "mid air" when the printer starts on that part?

Comments deleted.

ive tried print this using cura, hahahaha NO GO!
Ive tried print this using ideamaker, Nooooooooo...
Slic3er is the only one that seems to print this ok
nice model though

I printed it several times with Cura (2.6) without any problems at all. So it could be related either to your filament or print settings.

My settings are: layer height 0.3mm, wall thickness 0.8mm, print speed 65mm/sec, cooling fan 60%, no supports.
Filament: Janbex Transparent PLA 1.75mm