I wanted to change the viewing angle of the LCD and the controller was on the same board. I angled it all up a bit more so when I'm using my remote camera or operating it, its easier to see. It fits nice and snug. You'll need 4 more nuts and bolts with the original ones to attach it.
9/15/2017 - Adjusted the LCD opening a bit so it covers better and moved the knob hole (lol) down a bit.
12/23/2017 - Looks like this mod is not compatible with the single fan mod. The fan goes too far to the left and hits the housing. As I do not have the fan mod I will not be adjusting. If someone wants the tinkercad files I can look into it.
1/3/2018 Thanks to Fuganater for a solution if you want the LCD mod and fan mod.
5/18/2018 Looks like if you're using TH3D EZABL mount it will crash into it. Benebrady has made a modded version to resolve that issue here. - https://www.thingiverse.com/thing:2917928/#comments
10/6/2018 I've created 2 new versions that are not so tight. V3 I've added to this publish and everything fits well. The REALLY new thing I did is I've made one with a case for a raspberry pi zero w on the side. I have octoprint installed and have tested it. Everything works great. I do not run a webcam so I haven't had any need for a full pi.
Download here ->> https://www.thingiverse.com/thing:3140655