Other remixes of YoungBuck's nifty hooks have changed the length for thicker seats, others have reversed the direction of the clip to face outwards (easier to load bags). This remix does both. Photo compares the original to the long, which is 10mm longer.
I added a second file that has the clip reversed but NOT lengthened. Use the "short" file if you need a shorter length. This is the same length as the original design by YoungBuck, but the clip is reversed as mentioned above.
Consider rotating so the curve tipped car clip end is on the table, and use support material to meet up to the bag clip end. I used ABS (for strength), and needed to add 3 brim to make sure it stayed down on bed (not hard to trim off brim).
Fusion 360 Mesh Workspace