Roadhog is my favorite Overwatch character and it seemed there was a general lack of this specific Overwatch prop, so I thought I'll give it a go. Very happy with the finished product here. Would love your feedback so I can make improvements if needed. This was simple to design this initially and so painstaking to get a lot of the details right.
I haven't mentioned this previously, but all of the models I release are cut into parts that can fit onto a standard hobbyist printer with a build space of 6"x6"x6".
I didn't bother adding joints this version, or holes for a rod, sanding each part and just super gluing it all together should be fine for a cosplay piece.
The exclusion of the tape is purposeful. I figured that it would be easier and more realistic if people who print this use old hockey tape or wrap bandages. Also I recommend picking up a plastic chain from a Halloween store to finish the piece.
Edit: Apparently Simplify3d deals with Blender exported stl's differently than Cura, which is what I usually use. I have had the complaint on a few of my designs that they are not scaled. So I did some investigating and experimenting wit the program, and apparently you need to set the scale factor to 1000 when exporting out of blender so the dimensions to come out right in Simplify3D. So sorry for the trouble everyone. Lesson learned. From now on all my designs wil feature the 2 different scales depending on the slicer you use, and I am going to update all my old models.
Enjoy everyone! If you do please leave a like, or subscribe to my page. I plan on releasing lots more and hope to keep bumping up the quality.