This is a Runcam Split mount for the Armattan Chameleon. It uses the standard holes that come in the stock Chameleon camera mounting plates. It also incorporates a captive nut slot to use the stock tilt adjustment screws. This works best with the 2.5mm lens, pushing it right up to the edge of the frame. At around 30 degrees, there is only a small bit of props visible in the bottom corners of the HD video.
Print this in TPU with supports. You will need a non-locking m3 nut for the tilt adjustment thumb screw. I had to trim the m2 screws that are used to mount the camera so they would not bottom out in the case. There is just enough clearance for the mounting screws, while providing a secure and adjustable mount.
For more FPV and quad stuff, check out my other things and blog over at http://fpvobsession.com/.
- Added a version that should work well for the shorter lens. I have not printed this as I don't have the short lens to test. Please let me know how it works and I can adjust if necessary.