I designed this test bench for easy setup, wiring, testing, and configuring of flight controllers, video transmitters, receivers, etc. Has 4 mounting hole patterns for patterns of 30.5mm, 20mm, and 16mm hole spacings. Perfect for any and all boards on the market. plus 2 tie down spots allow for a receiver or even vtx to be strapped down. Enjoy!
Plate printed in ABS and the feet in TPU. The feet i inserted a m3 nylon standoff and just used a m3 screw from top to bottom :) allows for components to be powered from the back without risking touching components. (huge for me since i use a desktop psu)
TIP - I do recommend tapping the holes with m3 tap for the 30.5mm and 20mm patterns and m2 for the 16mm patterns :)