Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!
Kadah

Monoprice MP Select Mini V2 Z Axis Adjustable Endstop Internal Mount

by Kadah Jun 23, 2017
Download All Files

Thing Apps Enabled

Please Login to Comment

FYI, to any who is reading this, I'll be remixing this to enable the internal mount to be clamped onto the vertical rods so disassembly is not required. I'll post in a week or so. Good progress here. I have the same problem as you did Kadah.

Have you managed to complete that yet?

That's a good idea. I would have made it that way, but it was one of the first things I made/modified and I was still learning the basics of Fusion.

I have been busy with other projects this year. I had planned to add the z end stop to my almost finished lead screw and steeper upgrade mod which doesn't require removing the z axis if your able to remove all the needed screws.

Ok printed and in use. Several things.
There are no holes for the screws, meaning the switch dangles, had to use hot glue to keep it steady.

The switch mod sits inside the metal housing, as does the adjustment screw holder this makes it a pain to adjust this. as you do not get much travel with an allen key.

At some point I'll be remaking this for easier adjustment..

I did not model any screw holes for a couple reasons. The switch sits against the inside wall of the tower and there wouldn't be any room for the faster. I didn't have any screws that small other than the originals, which were too long, and they nuts wouldn't fit.
It was sized so that the switch would be a press fit in to the mount, but I did use a little mounting putty/Blutak.

I did not make the original adjustable mount, only a different switch mount since the other one wouldn't work on my V2. That one was designed to clamp to the inside lip in that spot, but was too high on my v2.

To adjust it, I use a ball end hex driver. I completely recommend getting one each of the 2 most common sizes you'll use, 2mm and 2.5mm. I'm using a Wera 05118092002 and 05118094002.

Printed one, i'll be tearing apart my printer this weekend for it.

If you haven't already installed the z axis rod stabilizers, that would be a perfect time to do both since pulling the z axis isn't fast.
https://www.thingiverse.com/thing:1775502

Monoprice Select Mini Z-Axis Rod Stabilizers

Already printed and waiting :)

Comments deleted.