Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

MakerMaveric

Go-tcha Keychain Case

by MakerMaveric Jun 22, 2017
Download All Files

Thing Apps Enabled

Please Login to Comment

Print fits, but very tight, assuming this was to ensure the Go-tcha doesn't slip out? Cracked small piece off at the opening trying to push the Gotcha in. I'll probably try again with a few % increases to see if I can make it just a little easier to insert. Otherwise great idea and appreciate it!

Great build - prints super fast and is very functional for this device.
No longer will I bump it when its on my wrist and inadvertently change all my settings
10/10
didn't need to mod it at all, prints just as recommended
The plunger/keychain is an especially nice touch. makes unloading the device for charging a snap

Hello, very nice job, could you share the model of this case so it can open on iventor for example? i am interested in make some modifications that after i can share with you too. Thank you very much:)

I use Fusion360 and I'm not sure what format Inventor can open. I can export f3d, sat, and step formats. Would any of those work?

I also never try but i believe that the normal fusion format will work but if is ok for you could you export in 1 or 2 more formats just in case, can you upload here on thingverse? Thank you so much:)

I uploaded the f3d and step formats. Hope they work for you. It is messy but body 4 and 5 are the ones to work with. Made it when I was still new at design.

I already open the step file, Thanks a lot. I am new in 3d printing and in this website, when i make it i will share in my profile a file with the modifications, one more time, thank you.

i printed it with pla, but the case is way too tight (in original size), i scratched my gotcha-screen with it. maybe ill try to print it 2% bigger.

Tried to print, loaded stl into cura, slice saved to sd (as normal) when I went to print the status bar jumped to 100% in less than 2minutes on my monoprice mini. Retried several times and then tried a different stl, and that stl printed so not sure why im having issues here, not sure if its my end or the stl.

Thank you for this great idea and design!

Can you upload the model?
I want to print it without the built in supports arround the screen.

Sorry I didn't notice the shell in there. I don't think it would have printed, but I did fix it and uploaded a new stl. You should be good to go!

Printed very well, but didn't look as nice when I cut away the extra material (see makes).

Thank you for the new stl