MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now


Hyphen table

by _Hyphen_ Jun 13, 2017
Download All Files

Thing Apps Enabled

Please Login to Comment

Un petit délire avec Blender Mr Hyphen ?
Les fichiers .stl mis en ligne ont 0,02 mm de diamètre pour les trous !!!
En premier corriger le fichier Hyphen large joints avec Microsoft 3D Builder car il est pourri. Passer de Pi en mm pour conserver le 0,02 mm. 3D builder vous propose de corriger le fichier à l'enregistrement.
Ensuite utiliser Fusion 360 pour importer ce mesh, convertissez en body et utiliser scale avec un facteur de 500 (10x1/0,02 = 500) pour avoir des trous de 10 mm et exportez en .stl.
Modifier le scale factor pour obtenir des fichiers stl adaptés à vos rondins.

A little delusion under blender Mr Hyphen?
The .stl files put on line are 0.02 mm in diameter for the holes!!!
First, correct the Hyphen large joints file with Microsoft 3D Builder because it is rotten. Change from Pi to mm to keep the 0.02 mm. 3D builder offers to correct the file at the recording.
Then use Fusion 360 to import this mesh, convert to body and use scale with a factor of 500 (10x1/0,02 = 500)to have holes of 10 mm and export in .stl.
Modify the scale factor to obtain stl files adapted to your woods.

Wow, stunning. This might just be the most underrated model on thingiverse. thanks for the upload, I will let you know if I decide to print this.

I can not believe it. I printed all the pieces but they are for 20mm rods and in my country there are only 22mm.
Please! Could you modify it to be able to use 22mm rods?

hello!u can tell the , large, diameter and thickness of the wood?

Hi there! I love your design! I would love to know the generals dimensions of the table. Thanks!


Great design.

I have a problem with the stl files. When I open it in Cura the size seems too small and Cura automatically at 10000% but it's always too small...
What is the right length and width of the files to rescale it at the right size?

Thank you.

The large joints with leg parts are 23.3 x 17.4 x 6 cm and the smaller ones are 12 x 19.6 x 4.64 cm. It really depends on the size of wood you can get. :) My suggestion is try to print just 1 leg part that should take like 20-30 minutes and adujst the rest according to it :)


Thank you.

I try and tell you what is the best settings

jmlalou, could you print this design? I tried to print it as it is (with 10000% cura scaling) and the result was nothing but a little mess of plastic.

Many people here seem to have a problem with the scaling I will look into it and reupload the model. :)


Great design! I'm looking forward to making this my next project. Do you have more information for the material (dowel&board) dimensions? I'd like to purchase it before printing.

This one is build with Spruce wood as it was realy cheap but you can buy anything from beech to oak depends on what your local hardware stores or sawmills offer :) The dimensions I used are 2x50 cm for the round wood bars and 120x50x1.8 cm for the table top. The round bars were bought at 70 cm so I had to adjust them but hardware stores often sell 100 cm so you just have to cut them in half. :)