Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

mightynozzle

Customizable Fidget Spinner - Nuts, Coins or Bearings as Satellite

by mightynozzle Jun 6, 2017
Download All Files

Thing Apps Enabled

Please Login to Comment

Thanks, very nice fidget spinners. easy and fast to print and cheaper that those with bearings. I found out that if the holes are too tight, an easy way to insert the nuts is to use a vise rather than a hammer.
BTW, in the customizer it is mentioned that 12.8mm is the diameter for M8. I believe it is 13mm

Thanks for the tip with the vise! I used a screw clamp to push in the nuts and the bearings. It is interesting about the sizes. The DIN934 norm says 13.0mm from one flat side to the opposite side, but my DIN934 M8 nut is 12.72mm measured. I've added the advice to measure the nut, before printing this thing.