MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now


SD - USB Dock

by Jewcookie May 18, 2012
Download All Files

Thing Apps Enabled

Please Login to Comment

Slots are all different sizes, most are too small and one for the SD card is too big. Weird design.

Great but USBs don't fit very well... it's too small. Scaling it up a little would fix the issue though

The SD cards fall through if you lift up the case. May be improved with closing up such that no fallthrough can accidentally happen.

Tried making it 2 different times, with PETG and PLA, but the holes aren't large enough for USB :( Is it required to only have 1 shell?

Comments deleted.

Just printed one myself. Unfortunately my Ultimaker shrink everything by a tiny bit and the USB keys don't fit the slow :(. Normally do the USB keys fit in snug? or a bit loose?

Same here. Scale up by 2% and the USB-keys slides out much easier!

They fit thight indeed, but after you put them in a couple of times they go in nicely. :-D

Printed with 50% infill, 1 shell, no raft.

With Jetty firmware on TOM with no raft at 70mm/sec took 31 minutes to make.

Fits both the SD cards and USB very nicely. No text on the side?

Thanks for the design

Glas you like it.

I cut off the text when i altered the size of the SD compartment a bit. Forgot to put it back on. O:-)