MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now


The Great Terraforming Mars Storage Mash Up

by webdad May 19, 2017
Download All Files

Thing Apps Enabled

Please Login to Comment

The 12 card holder worked great for the corporation cards, but is just a couple mm too short for the prelude cards (all un-sleeved). Is the hex tile cover supposed to be loose? It fits over the hex tiles, but isn't a tight fit like the card holders are.

Yeah, this insert was designed before any of the expansions were on the market, so not surprised. Given the explosion of inserts, you could just print a couple extra 12 card holders, since there is definitely room in the box for more. The hex tile cover is probably a little loose since that was in the early days of my design experience, and I wasn't as good with tolerances.

Are you looking at re designing this insert with the new expansions?

I haven't had a chance to come back to this, so it isn't currently on my radar. I think I have most of the expansions, but there are quite a few if I recall.

No worries, After your DI Insert i thought i would see what else you had to offer and with just picking up a copy of TM and didnt want to start printing if you plan to re designing that was all :)

Seems great, but my cards are sleeved :'(

Yip, the card boxes are sized to hold sleeved cards. If you meant that your cards are not sleeved, they will fit as well with a little bit of extra room.

Oh okay ! I meant that my cards are sleeved, so this is good news ! Thanks !

I really like the player boxes :) but the Copper and Silver are too big^^ around 1 cube line ^^

If I recall from when I was designing those, I made them a bit too big in order to enable the cubes to easily shift around and settle into place when you shake the box, so that you could load the box without having to stack each individual cube in its place. The link to the box plans is below, so feel free to resize them if you'd like.

Could you share the OpenSCAD files for the player cube boxes. I love the interlocking lids and want to print them at different sizes for other games. :)

Yip. Get everything you need here at this thing: https://www.thingiverse.com/thing:15113. I use these boxes in all kinds of sizes configurations. The OpenSCAD file also lets you create covers that slide down over the top, instead of sliding in from the side.

Parametric compartment box with lid
by acker

Sweet, thanks for the link.

Love the design of the player mat! Is there any way you could split each section so I could print it on my MPSM? My bed is only 120 x 120

Sorry for the late reply. It may be a while before I can look at that level of modification. You might want to try slicing the model with meshmixer or something similar. I actually might try that first when I get some time.

I would really appreciate that as well. I have an MPSM and would love to be able to print everything you've done here. Great work on all this! Thank you for putting it together.

You could always slice them with the Plane Cut tool in MeshMixer and then glue the two halves together.

Those card holders are fantastic, now if only there was a way to make a holding solution for cards that doubled as a super tall card dispenser for play

Come up with anything here?