MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now


Tevo Tarantula 2mm, 2.5mm, 3mm, 4mm, 5mm or 6mm Glass Bed Corner clips

by beerman_uk May 9, 2017
Download All Files

Thing Apps Enabled

Please Login to Comment

Thanks a lot

I printed it today and it suit perfect , i think i only printed the right ones 6 mm its a little bigger but it do the works , everything is fine


If you have a 3mm glass bed (as most of us), just print file: Glass_clip_left_side_5mm as our friend has mess a little bit the files and names.
But we thank him anyway! He has done a great work! Thanx mate! ;)

Dude, the 4mm left clip has wrong inner size, it's smaller than the 3mm left clip.

Fixed. Download again.

Anybody tried it with 4 flush clamps?

Hello this is a great model you have here! My issue is that after printing I looked at your pics and realised your glass is slightly smaller than mine. I cannot get my clips to fit on with the glass. My glass is 220mm x 220mm x 4mm. Any chance I could have an edited version please?

Hi I've made the fusion 360 files available, please download and make any amendments you need.

What size glass did you use? Mine was too small.


How small and in which dimension? Let me know those and I'll amend.

Hey I'd like some custom made if you're up for it :)

Glass dimensions are 200x213x3... it was all I could find on amazon prime.

I currently have the longer side going from front to back. Standard size Tevo Tarantula heated bed.

Thank you!!

I don't know how to alter this.
Would you be able to make it for the Black Widow ?

Isn't it the same bed as the Tarantula large bed? I don't have a Black widow or a large bed so can't test. If you can provide me exact measurements of how far the middle of the hole is to the edge of the bed I can edit.

I might not have been clear when I said the Hole for the Black Widow is 10mm, that is from both ends/sides of the bed. Thanks

The bed is a bit different.
From the edge of the heat bed plate to the center of the hole
is 10mm
I use the 3mm glass bed if that makes your job easier :))
Thank you
Would you tell me how I actually make these type of designs and with what.
I always like to learn new things