Corner clips for the Tevo Tarantula with 2mm, 2.5mm, 3mm, 4mm, 5mm or 6mm thick glass. They will probably fit other printers but can't test. My main purpose with this design was to get rid of those ugly paper clips.
The left side clips are flush with the glass so the nozzle won't catch when the printer homes, the right side clips are raised above the glass by 2mm to clamp it down. You may get away with printing 4 of the flush ones but I've not tried.
To fit the glass slot it into the right side, you may need to pull the left clips back a bit to push the glass down.
For those worried about heat I only print in PLA and having my bed at 65C with my PLA corner clips is no issue. If you want to print anything in ABS having PLA corner clips probably isn't a great idea ;)
If they don't quite work for you feel free to remix them to add/subtract 1mm here or there.
UPDATE - I'm being inundated with requests for changes to the size etc. I have not got time or the patience to do this for every different size glass. I will not be doing any more updates on this and will be making the fusion 360 files available instead. Do what I did and watch a few youtube videos, you'll soon get the hang of it.
Update 2: added 5mm to finish the set.
Fusion 360 file is here:
If you make a set please post a make.