Loading

MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now

whosawhatsis

Minimalistic spool roller.

by whosawhatsis May 14, 2012
Download All Files

Thing Apps Enabled

Please Login to Comment

Great idea! I'm concerned about moisture and want to build a cabinet to hold my reels and keep them dry. The first ideas I looked at for reel storage involved pipes or rods going through a number of reels. Of course, that's easy, but it makes changing reels a little hard, especially if they are in a "box". Using your idea, each reel in my cabinet would have it's own "space" which makes re-winding and changing reels easier. There might be alternate ways to suspend each reel from it's hub to isolate it from it's "neighbors", but, I think that would take more space as well as material to implement. So, my plan is to build a box with 2 "shelves", each capable of holding 4 reels and build 8 copies of your design. The bearings are relatively cheap on Amazon.

Changing and feeding the lower reels could be a problem but I think I can work around that by making the top "shelf" "slide out". Humidity meters and dessicant are also relatively cheap. I know I'm probably paranoid, but there are so many variables in making a good 3d print that it seems reasonable to control what you can. If I get something done, I will post is here. Thanks, again, for sharing your idea.

Minimalistic indeed!

I modded it a bit, added some feet to help it not lift off my printbed, along with some guides to give my 608s something to sit on that was not threaded metal. I goofed a bit on my first print, not thinking that I needed to adjust the height after specifying the size of the bearings.

Works a treat, for the first time I've been able to make some unattended prints. Thanks!