This is my first Vacuum Robot which can be all 3d printed.
For more info see the instructable https://www.instructables.com/id/Build-Your-Own-Vacuum-Robot.
Print the following files:
(Note: The button base shall be printed depending on the length of the button of your push button. Try printing the button_1mmbasewidth.stl first and if the button doesn't push easily print then the button_2mmbasewidth.stl)
(Note: In case you break the small male cylinder where the button support is intended to fit (cause it can be fragile), you can drill a 1/8" hole and print the buttonSupport_2_drillhole.stl)
Let me know any suggestions!
Note: You can't sell this. But we can make a deal so text me.
Print the following things before all the others to ensure the quality. (Not too much filament is needed)
If you like the project, you can show your love buying me a Coffee :), you're awesome!
Vaccum_Robot_bottom_9.0.1_bottom.stl added, fan drill hole fixed.
0.2 mm layer height
1.2 mm shell thickness
30% fill density
215 C printing temperature
70 C bed temperature
Support type everywhere
Retraction (Very important!!) 50 mm/s 0.7mm
Printing Speed 60mm/s