This is a remix of the famous Low Poly Pikachu from FLOWALISTIK.
I changed some things so you can use it as a lamp:
- Height: 195 mm
- Wider bottom in order to fit a LED light
- Stronger tail and new eyes in order to be able to print it hollow and with 1 perimeter
- Use 1 or 2 perimeters (Use 1 if you use dark material. The pink in the pictures is dark.)
- 0 bottom layers
- 3 or 4 top layers
- no infill
- Use a brim with 10 outlines
- Print it at least 190 mm tall. This will make the hole in the bottom 40 mm wide.