MakerBot Print is our newest print-prepration software, which supports native CAD files and STL assemblies,
allows you to interact with all your printers via the Cloud, and many other exciting new features.

Download Now


Articulated Mounting Arm

by jeffreyk Apr 26, 2017
Download All Files

Thing Apps Enabled

Please Login to Comment

I wonder if this design will hold a moderately heavy 20-22" monitor.

No it wouldn't. It has been holding that wireless bridge for a couple years now but it's pretty light.

yeah, it did seem to sag a little under the weight of this antenna in one of the photos. Back to Tinkercad then. I like your general idea of frames with an empty circle in the middle and the multi-part hinges, just need to beef it all up to maybe twice the size. Then, with luck, a 100% infill and printed flat on the bed so as to avoid applying tearing forces to the weakest interlayer adhesion points, it will hold a TV or anything.

nice...here is the

2 M4 screws 27mm long (vertical)
1 M4 screw 32mm long or 1 M4 threaded rod 32mm long (horizontal)
2 M5 screw and bushing (wall fixation)
2 M5 washer (wall fixation)

Oh my version is pretty different. I do not think that BOM is accurate for my design. Unfortunately I designed it around some nuts and bolts I had laying around. I have no idea what they are and I am not entirely sure how to measure screws, but I will try and then update. For now here are some of the dimensions of the holes to help people out.

Length: 45mm long screw
Inside Diameter: 4mm
Nut width between flats: 8mm

-Wall mount-
Inside Diameter: 4.3mm
Recess Diameter: 8.7mm
Recess Depth: 2.8mm

-Angle Mount-
Screw Length at least 23mm, I cut mine off to fit my design.